Match the grade and coating to the cut
Tool life and surface finish depend on the workpiece material, cutting operation, tool geometry, coolant and machine stability. This guide helps sourcing teams compare practical grade and coating options for Wujinniu CNC tooling.
ISO material groups for carbide cutting tools
Use the workpiece group as a starting point, then confirm grade, edge preparation, geometry and cutting data through an application review.
| ISO group | Typical materials | Selection focus |
|---|---|---|
| P | Steel and alloy steel | Balanced wear resistance, edge strength and chip control. |
| M | Stainless steel | Sharp geometry, heat resistance and built-up-edge control. |
| K | Cast iron | Abrasive-wear resistance and secure edge preparation. |
| N | Aluminium, copper and non-ferrous alloys | Polished edges, open chip space and low cutting force. |
| S | Titanium and heat-resistant alloys | Thermal stability, rigid setup and controlled cutting speed. |
| H | Hardened steel | Hard coatings, stable geometry and controlled engagement. |
Coating options for CNC tooling
| Coating | Typical use | Primary benefit |
|---|---|---|
| TiAlN | Steel, stainless steel and general carbide tooling | High-temperature performance and wear resistance. |
| AlTiN | High-speed cutting and demanding carbide tools | High hardness and heat resistance. |
| AlCrN | Stainless and hardened materials | Oxidation resistance and edge protection. |
| Polished or uncoated | Aluminium, copper, brass and soft non-ferrous materials | Sharp edge, low friction and clean chip evacuation. |
Grade and coating choices by product family
U Drills
Grade and coating selection for stable holemaking, chip evacuation and repeatable hole quality.
Carbide Inserts
Insert substrate, chipbreaker and coating matched to turning, milling or drilling materials.
Milling Tools
Coated and polished carbide options for profiles, pockets, shoulders, slots and high-feed milling.
Anti-Vibration Boring Tools
Stable edge preparation and wear control for long overhangs, deep cavities and thin-wall work.
Boring Tools
Geometry and grade choices focused on accurate diameters, surface finish and predictable tool life.
Custom OEM / ODM
Discuss substrate, coating, marking, packaging and private-label requirements for your program.
How to select a grade and coating
Identify the material
Confirm the ISO group, hardness, alloy condition and abrasive or adhesive behaviour.
Define the operation
Separate drilling, turning, milling, boring, roughing and finishing requirements.
Check the setup
Review rigidity, overhang, coolant, spindle speed, feed and chip evacuation.
Validate the result
Compare tool life, surface finish, dimensional stability and total cost per part.
Wujinniu materials and quality support
Wujinniu is a CNC cutting tool manufacturer in Dongguan, Guangdong, China. Founded in 2019, our approximately 8,000 m² facility supports carbide tooling development, production, inspection and OEM / ODM supply. Every finished product follows a documented two-stage inspection process before shipment.
Send the workpiece material, operation, machine, cutting data and target result. We can recommend a practical grade, coating and tool configuration for your application.
