CNC cutting tools for precision machining applications.
CNC tooling product

18mm Pilot Bore CT50 Boring Head Holder, 54mm Gage Length

18mm pilot-bore CT50 boring head holder with 54 mm gage length, M8x1.0 connection thread and through-tool coolant. Check mating fit and request a quote.

US$236Indicative unit price1Minimum orderAsk for a quote

This CT50 Boring Head Holder has a 18 mm pilot connection and M8x1.0 connection thread. It is a modular boring-system component; the pilot size is not a specified cutting diameter.

Technical Specifications

Parameter Selected configuration
Tool type Boring head holder
Pilot connection diameter 18 mm
Machine taper CT50
Body diameter 31 mm
Gage length 54 mm
Overall length 155.6 mm
Connection thread M8x1.0
Retention knob thread 1"-8
Through-tool coolant Yes

Applications

Use this holder to connect a compatible modular boring-head assembly to the specified machine taper. Match the toolholder to the spindle and the boring-system interface before planning an internal machining operation.

Selection and Setup

Verify the pilot fit, connection thread, locating faces and clamping method against the mating component drawing. Nominal pilot diameter and thread size alone do not establish interchangeability between modular tooling systems. Do not assume BT, CT, SK and HSK machine interfaces are interchangeable.

Use the shortest practical assembled reach that clears the feature. The listed gage length is 54 mm and overall length is 155.6 mm. Check the actual assembly datum, spindle clearance and holder envelope; these dimensions are not interchangeable.

Through-tool coolant is listed as yes. Verify the assembled coolant passage, sealing arrangement and permitted pressure. No pressure rating, speed limit, runout tolerance, balancing grade or workpiece-material performance is stated unless confirmed for the complete assembly.

The listed retention-knob thread is 1"-8. Thread size alone does not define the correct pull-stud geometry. Confirm the spindle maker requirements and do not assume a retention knob is included.

Ordering

Order quantity starts at 1. The displayed price refers to this selected component and excludes paid-membership pricing. Confirm the current quotation, availability, mating interface and supplied accessories before ordering. Send the spindle interface, mating-head drawing, required assembled reach and quantity with the enquiry. No cutter, insert, boring head, retention knob or other accessory is assumed included.

Frequently Asked Questions

Q: Does the pilot connection diameter specify the finished hole size?
A: No. The 18 mm dimension identifies the modular pilot connection, not the cutting diameter or finished bore. The boring head, cutting tool and adjustment determine the supported machining range.

Q: How do I check compatibility?
A: Check the 18 mm pilot, M8x1.0 connection thread, mating geometry, locating faces and assembly drawing. Also verify the CT50 machine interface and the correct retention system. Matching a nominal diameter or thread alone does not prove compatibility.

Q: What should I check for reach and coolant?
A: The listed gage length is 54 mm, and overall length is 155.6 mm. Check the assembled reach and clearance rather than adding these dimensions interchangeably. Through-tool coolant is listed as yes. Confirm the complete coolant path, seals and permitted pressure before operation.

Browse boring tools or request a configuration quote.

Images are AI-generated illustrations based on corresponding reference photographs. They are not photographs of supplied stock, dimensional drawings or evidence of machining performance. Confirm the delivered configuration against the order specification.

Technical information is prepared by the Wujinniu CNC tooling team based on product application data and machining requirements.

Technical specifications

Use the parameters below to match the tool to your operation, machine interface, workpiece material and tolerance target.

18mm Pilot Bore CT50 Boring Head Holder, 54mm Gage Length technical specifications
Tool typeBoring head holder
Pilot connection diameter18 mm
Machine taperCT50
Body diameter31 mm
Gage length54 mm
Overall length155.6 mm
Connection threadM8x1.0
Retention knob thread1"-8
Through-tool coolantYes

Standards and compatibility

Product data is presented using common ISO tooling terminology so purchasing and process engineers can compare tool geometry, insert designation, machine connection, cutting data and workpiece material requirements.

  • Confirm the machine interface, maximum spindle speed and available coolant pressure.
  • Select insert geometry and grade by ISO material group and the required cutting speed.
  • Verify bore diameter, tool overhang, tolerance and runout before ordering.

Technical information: Technical information is prepared by the Wujinniu CNC tooling team based on product application data and machining requirements.

Ask on WhatsApp Email about this tool

✉