4NMT060308R Carbide Indexable Drill Insert with Coolant Through is a carbide inserts solution for drilling and holemaking. This practical guide explains where it fits, which specifications matter, how to set it up and what to check before repeat production.
Where this CNC tooling product fits
View 4NMT060308R Carbide Indexable Drill Insert with Coolant Through product details for the current product images, specifications and enquiry options.
4NMT060308R carbide indexable drill insert with coolant-through design, TiN coating and HRC45 listed hardness. The tool should be matched to the workpiece material, machine rigidity, holder interface, required tolerance and target production rate. A correct match helps maintain stable cutting, predictable wear and consistent part quality.
Key specifications to confirm
Use the product data below as a starting point. Confirm the final configuration against the supplier’s current catalogue and the machine manufacturer’s limits.
| Parameter | Product information |
|---|---|
| Model | 4NMT060308R |
| Material | Carbide |
| Use | Internal Turning Tool |
| Coating | Titanium Nitride (TiN) |
| Hardness | HRC45 |
| Applicable machine | Machining Center |
| Coolant | Through-coolant design |
| Price reference | US-12.50 |
| Minimum order | 100 pieces |
Application and setup guidance
- Identify the workpiece material, hardness, operation and finished dimension.
- Confirm the tool diameter, reach, insert or flute geometry and machine connection.
- Use a rigid holder and measure runout after cleaning the taper, shank and seating surfaces.
- Start with the recommended cutting speed, feed and coolant method, then inspect the first part.
- Record hole size, surface finish, chip form and edge wear so the next setup is repeatable.
How to improve process stability
Keep the tool projection as short as the application allows and make sure the cutting edge is fully supported. Use through-tool coolant or a controlled external stream when chip evacuation and heat control require it. If vibration, burrs or dimensional drift appear, check workholding, runout, insert seating, tool overhang and cutting data before changing the entire tool.
Frequently asked questions
What is 4NMT060308R Carbide Indexable Drill Insert with Coolant Through used for?
4NMT060308R Carbide Indexable Drill Insert with Coolant Through is used for drilling and holemaking. Select the geometry, size, machine interface and cutting data around the workpiece material and the required result.
How do I select the correct configuration?
Confirm the key specifications first: Model and 4NMT060308R; Material and Carbide; Use and Internal Turning Tool. Then verify reach, rigidity, coolant and recommended cutting data before production.
Can this product support OEM or ODM requirements?
OEM and ODM options can be discussed for compatible dimensions, inserts, coatings, markings, packaging and technical requirements. Confirm drawings and application conditions before production.
What should I provide when requesting a quotation?
Provide the workpiece material and hardness, operation, target dimensions, machine and holder interface, coolant capability, quantity and delivery requirements so the tooling can be matched accurately.
Request a tooling recommendation
For a precise recommendation, send the material, operation, target dimension, depth or reach, machine interface, coolant capability and planned quantity. Visit the Carbide Inserts product family or view the full CNC tooling catalogue for related options.

