CNC cutting tools for precision machining applications.
Technical knowledge

How to Choose Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium for CNC Machining

Application and selection guide for Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium, including specifications, setup, cutting stability, FAQ and OEM/ODM considerations.

How to Choose Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium for CNC Machining

Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium is a u drills solution for drilling and holemaking. This practical guide explains where it fits, which specifications matter, how to set it up and what to check before repeat production.

Where this CNC tooling product fits

View Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium product details for the current product images, specifications and enquiry options.

Ultra-high speed cobalt HSS WC/SP rapid drill for CNC spot drilling stainless steel and titanium. The tool should be matched to the workpiece material, machine rigidity, holder interface, required tolerance and target production rate. A correct match helps maintain stable cutting, predictable wear and consistent part quality.

Key specifications to confirm

Use the product data below as a starting point. Confirm the final configuration against the supplier’s current catalogue and the machine manufacturer’s limits.

Parameter Product information
Material M42
Type Spot drill
Point angle 180 degrees
Diameter options 8.5–35 mm
Surface finish Bright, uncoated
Customization OEM and ODM
Package 14.6 × 5 × 5 cm; 0.72 kg

Application and setup guidance

  1. Identify the workpiece material, hardness, operation and finished dimension.
  2. Confirm the tool diameter, reach, insert or flute geometry and machine connection.
  3. Use a rigid holder and measure runout after cleaning the taper, shank and seating surfaces.
  4. Start with the recommended cutting speed, feed and coolant method, then inspect the first part.
  5. Record hole size, surface finish, chip form and edge wear so the next setup is repeatable.

How to improve process stability

Keep the tool projection as short as the application allows and make sure the cutting edge is fully supported. Use through-tool coolant or a controlled external stream when chip evacuation and heat control require it. If vibration, burrs or dimensional drift appear, check workholding, runout, insert seating, tool overhang and cutting data before changing the entire tool.

Frequently asked questions

What is Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium used for?

Ultra-High Speed Cobalt HSS WC/SP Rapid Drill for Stainless Steel and Titanium is used for drilling and holemaking. Select the geometry, size, machine interface and cutting data around the workpiece material and the required result.

How do I select the correct configuration?

Confirm the key specifications first: Material and M42; Type and Spot drill; Point angle and 180 degrees. Then verify reach, rigidity, coolant and recommended cutting data before production.

Can this product support OEM or ODM requirements?

OEM and ODM options can be discussed for compatible dimensions, inserts, coatings, markings, packaging and technical requirements. Confirm drawings and application conditions before production.

What should I provide when requesting a quotation?

Provide the workpiece material and hardness, operation, target dimensions, machine and holder interface, coolant capability, quantity and delivery requirements so the tooling can be matched accurately.

Request a tooling recommendation

For a precise recommendation, send the material, operation, target dimension, depth or reach, machine interface, coolant capability and planned quantity. Visit the U Drills product family or view the full CNC tooling catalogue for related options.

Continue learning

Related tooling resources

Connect the machining guidance with products, materials and manufacturing support.

Need help choosing a tool?

Send the material, operation and result you need.

✉