A small-diameter SP indexable U drill from 6 to 12 mm for CNC drilling in steel and stainless steel, with replaceable carbide inserts and through-tool coolant.

What is a small-diameter SP U drill?
A small-diameter SP U drill is an indexable CNC drilling tool for compact holes. The 6-12 mm range covers small holemaking applications where replaceable carbide inserts, stable positioning and controlled coolant delivery are important.
Key specifications
| Specification | Listed value |
|---|---|
| Diameter range | 6-12 mm |
| Tool category | Small-diameter indexable U drill |
| Recommended materials | Steel and stainless steel |
| Insert system | Replaceable carbide inserts |
| Coolant | Through-tool coolant |
| Machine compatibility | CNC machining centres and live-tool turning centres |
How to select the correct diameter
Select the tool diameter from the finished hole requirement, allowance and insert geometry. Confirm the 6-12 mm size against the drawing and account for tolerance, chip evacuation and the machine’s coolant capability. Do not treat the diameter range as a substitute for the tool maker’s application chart.
Application in steel and stainless steel
Steel and stainless steel require stable clamping, correct cutting data and effective chip evacuation. Through-tool coolant can help move chips out of a small hole and manage heat. Match speed, feed, insert grade and depth ratio to the material and machine rigidity.
Common selection mistakes
Typical problems include choosing a diameter without checking the finished-hole tolerance, using an incompatible insert grade, allowing excessive runout, or drilling deeper than the chip evacuation setup can support. Check the machine interface and workholding before production.
If the measured hole is larger than required, follow the indexable drill oversize-hole diagnostic sequence to check measurement, insert seating, holder alignment and entry conditions before changing cutting data.
Frequently Asked Questions
What diameter range does this SP U drill cover?
The listed range is 6-12 mm.
Which materials are listed?
The product information lists steel and stainless steel for CNC holemaking.
Does it use replaceable inserts?
Yes. It is listed as an indexable U drill with replaceable carbide inserts.
Technical information is prepared by the Wujinniu CNC tooling team based on product application data and machining requirements.
See the related Small-Diameter SP Indexable U Drill 6-12 mm product page.
Choose a configuration for your application
Use the 6–12 mm SP drill configuration checklist to specify cutting diameter, required reach, shank interface and coolant capability. Confirm the exact body and compatible inserts before ordering.

